Common tools and Equipment for computer system servicing

Long Nose Pliers

Their namesake long nose gives excellent control while the cutting edge near the pliers' joint provides "one-tool" convenience. Because of their long shape they are useful for reaching into small areas where cables or other materials have become stuck or unreachable with fingers or other means.

Side Cutter Pliers

Diagonal cutting pliers are used for cutting wires, screws and nails. They are known by many different names: side cutting pliers, side cutters, nippers and wire cutters, to name but a few! They are called diagonal cutting pliers because the cutting blades are at an angle to the handles.

Flat Screw Driver 

A flat-head screwdriver is a screwdriver with a wedge-shaped flat tip, used to tighten or loosen screws that have a straight, linear notch in their heads.There will be some sort of handle attached to a steel shaft that is flattened into a wedge shape at the tip.

Philips Screw Driver

A screwdriver that is designed to be used with a type of screw that has a slot in its top that looks like a cross.

Soldering Iron

A soldering iron is a hand tool used in soldering. It supplies heat to melt the solder so that it can flow into the joint between two work pieces. A soldering iron is composed of a heated metal tip and an insulated handle.

Soldering Stand

This is s simple soldering iron stand composed of heavy-duty metal base and a reinforced spring holder.

Soldering Lead 

Is a fusible metal alloy used to join together metal work pieces.

Soldering Flux

As cleaning agents, fluxes facilitate soldering, brazing, and welding by removing oxidation from the metals to be joined.By preventing the formation of metal oxides, flux enables the solder to adhere to the clean metal surface, rather than forming beads, as it would on an oxidized surface.

Crimping Tool

A crimping tool is a device used to conjoin two pieces of metal by deforming one or both of them in a way that causes them to hold each other. The result of the tool's work is called a crimp. A good example of crimping is the process of affixing a connector to the end of a cable.

Wire Stripper

A wire stripper is a small, hand-held device used to strip the electrical insulation from electric wires.

Tweezers

Tweezers are small tools used for picking up objects too small to be easily handled with the human fingers. ... People commonly use tweezers mainly for tasks such as plucking hair from the face or eyebrows, often using the term eyebrow tweezers.

Brush

Use to remove dust and dirt in computer..

Precision Tool

There are various types of precision tools such as drilling and boring machines, grinders, gear cutters, milling machines and so on. The grinding machine makes use of an abrasive wheel as its cutting tool and is used to finish work pieces.

Anti Static Wrist Strap 

An anti-static wrist strap is a key piece of safety gear that helps to prevent the buildup of static electricity near sensitive electronics or other projects where static charge could damage electronics or cause safety issues. ... An anti-static wrist strap may also be called an electrostatic discharge (ESD) wrist strap.

 

Multi Tester

A multimeter or a multitester, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure voltage, current, and resistance. Analog multimeters uses a microammeter with a moving pointer to display readings.

LAN tester

A LAN tester is mainly used for testing ethernet cables for faults or missing pair connections.